Deleting Raid Volumes - HP Z400 Maintenance And Service Manual

Deleting RAID volumes

Use the LSI Logic Corporation Configuration Utility to delete SAS RAID volumes.
1. Start the LSI Corporation Configuration Utility. During BIOS start up, you are prompted to Press
Ctrl-C to start LSI Corp. Configuration Utility.
2.
On the Main menu of the BIOS-based configuration utility, use the arrow keys to select an
adapter.
3. Press Enter
4. In the Select New Array Type screen, use the arrow keys to select New Existing Array.
5. In the View Array screen, use the arrow keys to select Manage Array. Press Enter.
6. In the Manage Array screen, use the arrow keys to select Delete Array. Press Enter.
Press Y
ENWW
to go to the Adapter Properties screen.
to delete the array and exit to the adapter properties screen.
Configuring SAS RAID devices
215