Download  Print this page

Creating Hp Backup And Recovery (hpbr) Media - HP Z400 Maintenance And Service Manual

Hide thumbs

Advertisement

Creating HP Backup and Recovery (HPBR) media

NOTE:
HPBR is only supported on Windows XP systems. For details, refer to the documentation on
the Supplemental Software - HP Backup and Recovery CD included with the workstation. The
documentation can be accessed during installation.
The Initial Recovery Point can be burned to optical media and used to recover a system. This section
describes making the media.
NOTE:
The workstation must have a CD or DVD writer to create the media set.
To create HPBR recovery media:
1.
The Initial Recovery Point was captured when the RestorePlus! media set was created previously.
If the IRP was not created, start the HP Backup and Recovery Manager and create recovery points
using the Expert mode. Follow the HPBR online documentation for instructions.
2.
Burn the IRP to media from HPBR.
Select HPBR Start > All Programs > HP Backup & Recovery > HP Backup and
Recovery Manager.
3.
Select Next at the first screen.
Select Create recovery CDs or DVDs to recover the system, and then select Next.
4.
Choose Next to display a list of available CD image and the recovery points.
5.
Check the box next to Initial Recovery Point, and then select Next.
6.
Follow the instructions to create the media.
ENWW
Restoring Windows XP Professional
27

Advertisement

Table of Contents

   Related Manuals for HP Z400

   Related Content for HP Z400

Comments to this Manuals

Symbols: 0
Latest comments: