Programming Remote Feature Access; Remote Access Password - Inter-Tel Axxess User Manual

Single-line phone
Hide thumbs Also See for Axxess:
Table of Contents

Advertisement

P
ROGRAMMING
If you are away from your desk and forgot to put your phone in DND, don't worry.
With the Remote Feature Access, you can place your phone in DND or forward calls
from any other phone on the system. And, if you have a special dial-up line, you can
access your phone features from an outside line.
NOTE:
For your convenience, a pocket-sized guide of the Remote Feature Access is
located in the front of this guide.

Remote Access Password

Before you use Remote Feature Access, you should program a password, as described
below.
To change the password from your phone:
Lift the handset and dial
1.
Enter your current password, followed by
2.
NOTE:
Enter the new password followed by
3.
Enter the new password again for verification followed by
4.
mation tone.
To change the station password using remote programming, see the following section.
38
R
F
EMOTE
EATURE
3
9
Your extension number is your password at default.
A
CCESS
.
2
.
#
. You hear a confirmation tone.
#
Axxess Single-Line Phone User Guide
. You hear a confir-
#

Advertisement

Table of Contents
loading

Table of Contents