Using Account Codes - Inter-Tel Axxess User Manual

U A
SING CCOUNT
If your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to phone record reports that the system will periodically
print.
There are three types of account codes:
• Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
• Forced account codes must be dialed before you can place an outside call.
• Optional account codes can be entered at any time during a call.
NOTE:
Your customer service representative or System Administrator can tell you
which types of account codes are used on your telephone system.
To enter an optional account code:
Perform a hookflash and dial
1.
Enter the optional account code. If the account code is not immediately accepted,
2.
press
To set an account code for all calls placed from your phone:
Dial
3 9
accepted, press
is disabled.
To disable the code:
Dial
3 9
Axxess Single-Line Phone User Guide
C
ODES
.
#
, and then the account code. If the account code is not immediately
1
. This code will be used for all calls made from your phone until it
#
.
and press
#
1
.
3 9 0
35