Rear Panel - Ikegami HQLM-3120W Operation Manual

2-2 Rear panel (left)
AC power input
Insert an AC cable here to supply AC power.
Lock
After inserting an AC plug, lock the AC plug
with this lock to prevent it from disconnecting.
MAIN POWER switch
Turns on/off the AC power supply to the monitor.
To operate the monitor, turn ON this MAIN-
POWER switch as well as the POWER switch
on the front panel.
Fan1/2
When power is turned on, the fan starts running
for the operational check. Then, it automatically
operates according to the internal temperature.
When the fan does not start operating even the
set temperature to start fan operation is reached,
the following message is displayed on the screen.
FAN1 ERROR! : FAN on the left side as seen
from the back
FAN2 ERROR! : FAN on the right side as seen
from the back
Handle
It is used when taking out from a carrying case
etc. In addition, because it is large in size and
weight, please use a dolly or the like if it is
transported.
VESA Mount
VESA mount of "100 x 100mm" or "200 x 100mm"
can be installed here.
The attached stand is a stand dedicated to this
monitor.
* Do not use it for other models.
PRECAUTION
Connect the power cord included with this unit to a
3-pin outlet with ground terminal.
- 7 -
HQLM-3120W