Rear Panel - Ikegami HQLM-1720WR Operation Manual

2-2 Rear panel (left)
AC power input
Insert an AC cable here to supply AC power.
Lock
After inserting an AC plug, lock the AC plug
with this lock to prevent it from disconnecting.
MAIN POWER switch
Turns on/off the AC power supply to the monitor.
To operate the monitor, turn ON this MAIN-
POWER switch as well as the POWER switch
on the front panel.
Fan1/2
When power is turned on, the fan starts running
for the operational check. Then, it automatically
operates according to the internal temperature.
When the fan does not start operating even the
set temperature to start fan operation is reached,
the following message is displayed on the screen.
FAN1 ERROR! : FAN on the left side as seen
from the back
FAN2 ERROR! : FAN on the right side as seen
from the back
Handle (option)
This is an optional handle dedicated for this sys-
tem.
For details, refer to "10.2 Fixed stand STD-1720
(option) and handle GR-1720 (option)."
VESA Mount
VESA mount of "100 x 100mm" or "200 x 100mm"
can be installed here.
(option)
This is an optional stand dedicated for this sys-
tem.
For details, refer to "10.2 Fixed stand STD-1720
(option) and handle GR-1720 (option).".
PRECAUTION
Connect the power cord included with this unit to a
3-pin outlet with ground terminal.
- 7 -
HQLM-1720WR