In Netware 4.X Remote Printer Mode (Nds) - Oce VarioLink 2222c User Manual

5

In NetWare 4.x Remote Printer mode (NDS)

1
From the client, log in the NetWare file system with administrator authority.
2
Start NWAdmin.
3
Select an organization or department container for the print service, and select [Print Services Quick
Setup] from the Tools menu.
4
Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the
[Type] of the printer to [Other/Unknown] and save them.
5
Load the PSERVER.NLM file on the NetWare Server console.
Then, configure the following settings in [NetWare Setting].
Item
[IPX Setting]
[Ethernet Frame
Type]
[NetWare Print
Mode]
[Print Server Name]
[Printer Number]
5-16
Description
Select [ON].
Select a frame type to be used.
Select [Nprinter/Rprinter].
Enter a print server name to be operated as the Nprint-
er/Rprinter (up to 63 characters, excluding / \ :; , * [ ] < > |
+ = ? .).
Enter the Nprinter/Rprinter number.
Printing (Netware) 5.7
Prior check
Frame type
The print server
name specified in
Step 4
VL3622c/VL2822c/VL2222c