Table of Contents
Advertisement
Configuration
Highlight the box under the Alarm-Out heading and press
appears. You can associate as many Alarm-Outs with that camera as you wish. When
the DVR detects video loss on the selected camera, it will trigger output signals on all
the associated Alarm-Out connectors. You can also have the DVR's internal buzzer
sound if video is lost on the selected camera.
Highlight the box under the Notify heading and press
On and Off by highlighting Notification and pressing
items On and Off by highlighting that item and pressing
Highlight the desired box under the PTZ heading, and press
appear. Select the preset position for each PTZ camera, where you want PTZ cameras
to move to when the DVR detects video loss on the selected camera's input.
Rev 1.00
Note
For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Note
For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
to accept your changes.
Note
For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Figure 3-69
Video Loss Actions 2 Screen
69
. A list of Alarm Outputs
. You can toggle the entire list
. You can toggle the individual
. Highlight OK and press
. A list of PTZ presets
Document 900.0856
12/06
Advertisement
Table of Contents
