Table of Contents
Advertisement
Configuration
When the DVR is in the Time mode, the
screen. The DVR will record and displays the
during the scheduled times.
When the DVR is in the Event mode, the red
the screen. The DVR will record and displays the
screen when any event occurs. When the DVR is in Pre-Event recording mode, the
yellow
the DVR is in Pre-Event mode, the red
the DVR starts recording.
When the DVR is in Time & Event mode, the DVR will follow the Time settings and the
Highlight the box under the Channels heading and press
will be recorded.
Highlight the box under the Settings heading and press
settings. You can set the ips and Quality of the recording for any modes you set up in
the Mode column. If you do not set the ips and Quality in the Settings column, the DVR
will follow the default settings. See below for details.
Highlight the box under the
You will be asked to confirm that you want to delete the settings.
Highlight Default... and press
Highlighting boxes under ips and pressing
for Time and Event recording. You can select from 0.10 to 30.0 images per second.
Highlighting boxes under Quality and pressing
image quality for Time and Event recording. You can select from: Very High, High,
Standard and Low.
You can save your changes by highlighting Save and pressing
exits the screen without saving the changes.
Pre-Event Screen
Highlight Pre-Event in the Record menu and press
appears. If you do not have Event set up in the Record Schedule, a message will display
alerting you to this fact.
Rev 1.00
icon displays when there is no event, and the DVR is not recording. When
icon displays. The DVR follows the Event settings and the
Figure 3-51
icon displays at the top-left corner of the
and
heading and press
. The Default screen appears.
Default Setup Screen
allows you to set the images per second
57
icon at the top-left corner of the screen
icon displays at the top-left corner of
icon at the top-left corner of the
display when any event occurs and
icon displays.
to select which cameras
to define the recording
to delete the recording settings.
allows you to set the recorded
. Selecting Cancel
, and the Pre-Event setup screen
Document 900.0856
12/06
Advertisement
Table of Contents
