Configuration
You can assign IDs to each camera by highlighting the box under the ID heading and
pressing
buttons to increase and decrease the number. The PTZ ID number can be set from 0 to
256.
Highlight the Setup... box and press
Configure the port's setting based on the PTZ camera manufacturer's instructions.
You can save your Camera changes by highlighting Save and pressing
Cancel exits the screen without saving the changes.
Audio Setup Screen
Highlight Audio in the Devices menu and press
The DVR can record up to four audio inputs. Highlight the box beside the input and
press
associated with that audio input.
Highlight Enable Audio-Out and press
disabling audio out.
Rev 1.00
. Change the number by highlighting it and using the Up and Down arrow
Figure 3-39
Port Setup Window
Figure 3-40
Audio Setup Screen
. A list of cameras appears, and you can select which camera you want
. The Port Setup window appears.
. The Audio setup screen appears.
. This toggles between enabling and
48
. Selecting
Document 900.0856
12/06