Table of Contents
Advertisement
Operation
If the DVR's time and date have been reset to a time that is earlier than some recorded
video, it is possible for the DVR to have more than one video stream in the same time
range. Move to Select a Segment, and select the video stream you want to search.
Refer to
video streams.
Once you have set the date and time you want to search, highlight GO and press
The selected date and time will display. The PLAY/PAUSE, RW, FF, Jog and Shuttle
can now be used to review the surrounding video.
Event Log Search
The DVR maintains a log of each time the Alarm Input port is activated. The Event Log
Search screen displays this list. Use the arrow buttons to highlight the event for which
you would like to see video.
Rev 1.00
Appendix D, Time Overlap
Note
The lower number of the Segment indicates the latest recorded
video.
Note
It is possible that no recorded image displays on the current
screen. Press DISPLAY and change the screen mode to 4x4.
You will be able to easily see the camera have recorded video
during target time.
Figure 4-14
Event Log Search Screen
for further information on searching time-overlapped
95
.
Document 900.0856
12/06
Advertisement
Table of Contents
