Figure 3-37 Camera Ptz Setup Screen; Figure 3-38 Ptz Device List - Honeywell HRXD9 User Manual

Configuration
Highlight the PTZ tab, and the PTZ setup screen displays.
Highlight the box in the Product column for the PTZ camera you wish to configure and
press
You will need to connect the camera to the RS232 or RS485 connector on the back of
the DVR following the camera manufacturer's instructions.
Rev 1.00
Note A user who does not have Covert Camera View authority cannot
view video from cameras set to Covert 1 or Covert 2 in both the
live monitoring and playback modes.
Figure 3-37 Camera PTZ Setup Screen
Note You will only be able to set up PTZ devices if the PTZ port is set
to RS232 or RS485. You will not be able to use a modem if you
are using the RS232 port for PTZ control.
. A list of PTZ devices appears. Select your camera from the list and press
Figure 3-38 PTZ Device List
47
.
Document 900.0856
12/06