Shutdown Screen; Figure 3-20 New User Setup Screen - Honeywell HRXD9 User Manual

Configuration
•
•
•
•
To add a User, highlight the + User... box and press
allowing you to enter the User Name. Enter the name and assign the User to a Group
and password. You can use camera buttons 1 to 9 on either the front panel or remote
control to assign the password. The password can be up to 8 digits. You will be asked
to confirm the password.
Highlighting the box beside Auto Login allows you to select a User to be automatically
logged in when the DVR is powered up. It can also be set to never automatically log in
a user.
Highlighting the box beside Auto Logout allows you to select from a list of times that
the user will be automatically logged out. The options are: Never, 1 min, 3 min, 5 min,
10 min, 15 min, 20 min, 25 min, 30 min and 1 hr.
You can save your changes by highlighting Save and pressing
exits the screen without saving the changes.

Shutdown Screen

Highlight Shutdown in the System menu and press
asking you to confirm whether or not you want to shut the system down.
Rev 1.00
System Check — The user can view the remote system status or check the
remote system status as a batch process on a PC running RAS.
Record Setup — The user can establish all Record settings on a local system or a
PC running RAS.
Search — The user can access Search mode on a local system or a PC running
RAS.
Clip-Copy — The user can copy video clips on a local system or a PC running
RAS, and save video data in an AVI, bitmap or JPEG file format.
Figure 3-20
Note In addition to using the front panel buttons or the infrared remote
control, you can use the virtual keyboard to assign the
password. To display the virtual keyboard click the ... button
using the mouse (not supplied).
New User Setup Screen
34
. A virtual keyboard appears
. Selecting Cancel
. The Shutdown screen displays
Document 900.0856
12/06