Table of Contents
Advertisement
Configuration
Selecting Close and pressing
User Setup Screen
Highlight User in the System menu and press
authorized groups and users. You can add and delete groups and users. When adding
a group, you can assign authority levels to the group.
The +/- column is used to collapse and expand user groups. If there is a + or - in this
column, it indicates the item is a Group Name. If there is a - in front of the Group Name,
it indicates that the group has been expanded and all of the User Names within that
group are displayed below the Group Name. If there is a + in front of the Group Name,
it indicates that the group has been collapsed and all of the User Names within that
group are hidden. To collapse or expand a group, highlight the +/- column in front of
the desired group and press
Highlighting a Group Name and pressing
assigned to the group.
Caution
Rev 1.00
Note
Temperature and S.M.A.R.T. information will be available only
for IDE hard disk drives supporting the SMART (Self-Monitoring
Analysis and Reporting Technology) monitoring program.
Figure 3-18
User Setup Screen
Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the Factory
Reset button and all data settings will be lost.
exits the screen.
. The User setup screen displays the
.
allows you to change the authority levels
32
Document 900.0856
12/06
Advertisement
Table of Contents
