Figure 3-45 Video Loss Event Action (Record) Setup Screen - Honeywell HRSD4 User Manual

Configuration
2.
3.
When the DVR detects text input, the
Video Loss Event Action (Record) Setup Screen
The DVR can be set to react differently to video loss from each camera. Each camera
can be assigned:
•
•
•
•
•
Highlight Video Loss Event Action (Record) in the Event Action menu and press
The Video Loss Event Action (Record) setup screen appears.
Document 800-00919 Rev F
02/08
Highlight the Notify field and press
Notify is On, the DVR notifies the remote site when it has text input from a text-in
device based on a defined schedule.
Save your changes by highlighting OK and pressing
the screen without saving the changes.
Note For the Notify action to work, the DVR should be registered in the
RASplus (Remote Administration System).
a schedule
an associated camera
a recording speed
a video quality
a dwell time
Note These procedures are the same for both Mode 1 and Mode 2.
Figure 3-45
to toggle between On and Off. When
displays on the associated camera.
Video Loss Event Action (Record) Setup Screen
. Select Cancel to exit
.
77