Table of Contents
Advertisement
Configuration
Highlight the desired box under the PTZ heading, and press
appear. Select the preset positions for each PTZ camera, where you want PTZ cameras
to move to when the DVR detects text input.
Highlight the box under the Spot Monitor and press
cameras appears. Each SPOT monitor can be associated with a camera. The DVR will
display the associated camera on the SPOT monitor whenever it detects an input on the
selected text-in device.
You can save your Text-In changes by highlighting Save and pressing
Cancel exits the screen without saving the changes.
System Event Screen
Highlight System Event in the Event menu and press
screen appears.
The DVR can be configured to run self-diagnostics and report the results.
Highlighting the box beside System and pressing
that you want the DVR to run self-diagnostics on the system. You can select from 1 hr
to 30 days or Never.
Highlight the Setup... box beside Check Recording and press
Recording screen appears. Highlighting Schedule On and pressing
and Off. When set to On, you can select the day, time range and interval that you want
the DVR to run self-diagnostics on the recorder. The Interval can be selectable from 1
min to 7 days or Never. The
Rev 1.00
Figure 3-74
Health Check Screen
box allows you to delete a check recording schedule.
74
. A list of PTZ presets
. A list of SPOT monitors and
. Selecting
. The System Event setup
allows you to select the interval
. The Check
toggles On
Document 900.0856
12/06
Advertisement
Table of Contents
