Video Loss Screen; Figure 3-67 Video Loss Settings Screen; Figure 3-68 Video Loss Actions 1 Screen - Honeywell HRXD9 User Manual

Configuration

Video Loss Screen

1.
2.
3.
4.
Document 900.0856 Rev 3.00
11/07
Highlight Video Loss in the Event menu and press
screen (Figure 3-67) appears.
Figure 3-67
The DVR checks to see if anything is obscuring the camera. Highlight the slider
bar beside Check Obscuration, and use the Left and Right arrow buttons to
adjust the setting. The sensitivity can be set from Never to 255 (extremely
sensitive).
Highlight the Actions 1 and Actions 2 tabs and the Video Loss Actions 1 and
Actions 2 screens display.
Figure 3-68
The DVR can be set to react to video loss differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out connector,
sound the DVR's internal buzzer, notify a number of different devices, move PTZ
cameras to preset positions, and/or display a camera on a SPOT monitor.
Highlight the box under the Record heading and press
appears. You can associate as many cameras with that camera as you wish. If the
DVR detects video loss on the selected camera, it starts recording video from all
the associated cameras.
Video Loss Settings Screen
Video Loss Actions 1 Screen
. The Video Loss setup
. A list of cameras
83