Configuring Video Loss Settings - Honeywell HRHT4041 User Manual

•
Send Email
•
Record Channel
Note You also need to set the motion detection recording period. Go to Storage >
Schedule to configure the current channel for scheduled recording. See
Video Recording Schedule
•
PTZ Activation
•
Delay (Latch)
•
Tour
•
Snapshot
•
Video Matrix
•
Buzzer
•
Log
•
Voice Prompts
•
File Name
Click Apply to save your settings.
3.
To test your settings, click Test.
4.
5. To copy the motion detection settings to additional channels, click Copy, select the
channels that you want to copy the settings to, and then click OK.

Configuring Video Loss Settings

To configure video loss settings
client).
Select the check box to enable the system to
send an email notification. If the Snapshot
function is enabled, an image can be
attached to the email.
Select the channel(s) that you want to record.
In the Delay box, specify the amount of time
(1–300 s) to delay recording after a motion
detection event is triggered.
on page 39.
Select the check box to activate PTZ functions,
and then click Select. In the PTZ Activation
window, for each PTZ camera, select the preset,
tour, or pattern that you want to be called when
a motion detection event occurs, and then click
OK.
Set a length of time for the DVR to delay turning
off events and activated input after an external
alarm is cancelled.
Select the check box to enable a tour of the
selected channels.
Select the check box to take a snaphot of
selected channels.
Click to enable. When an event occurs, the SPOT
OUT port video (a 1-window tour) from the event
activation channel selected in the Record
Channel.
Select the check box to activate a buzzer noise
at the DVR.
Click to enable the DVR to record a local event
log.
Select to enable audio broadcast/voice prompts
in response to a motion detection event.
Select a file for the voice prompt.
Configuring Event Settings
Configuring the
89