Using A Mouse; Figure 4-6 Spot Monitor Menu; Figure 4-7 Sequence Menu - Honeywell HRXD9 User Manual

9-, 16-channel models digital video recorder
Hide thumbs Also See for HRXD9:
Table of Contents

Advertisement

Operation
If you want to display more than one camera on a Spot Monitor, you can display them
sequentially. In the Spot Monitor selection mode, press SEQUENCE on the front panel
or remote control, or select Sequence On from the menu to start displaying cameras
sequentially. Press SEQUENCE or select Sequence On again to stop sequencing on
the Spot Monitor. Any cameras that are Off, have lost video or are set to Covert (unless
the user has authority to view covert cameras) will be excluded from the sequence.
The Spot Monitor 1 supports multi-view formats and displays live video using the same
settings as the main monitor.
When the Spot Monitor is in the sequence mode, you can set the camera's display dwell
time. Refer to

Using a Mouse

You can use a mouse instead of the front panel buttons to perform many of the DVR
functions. The following operations are supported when using a mouse during live
monitoring.
When in one of the multi-view formats (for example, PIP, 2x2, 3x3 or 4x4), clicking the
mouse button on a camera image switches that camera to full screen. Clicking the
mouse button again returns to the previous multi-view format.
Rev 1.00
Figure 4-6
Spot Monitor Menu
Figure 4-7
Sequence Menu
Display Screen
on
page 50
for details.
86
Document 900.0856
12/06

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hrxd16

Table of Contents