Figure 3-64 Daytime Setup Screen; Figure 3-65 Motion Detection Actions 1 Screen - Honeywell HRXD9 User Manual

Configuration
Highlight the box beside Daytime and press
to set the Daytime range. The DVR will consider the remaining time range as the
Nighttime.
Highlight the Actions 1 and Actions 2 tabs and the Motion Detection Actions 1 and
Actions 2 screens display.
The DVR can be set to react to motion detection differently for each camera. Each
camera can be associated with another camera, trigger an Alarm-Out connector, sound
the DVR's internal buzzer, notify a number of different devices, move PTZ cameras to
preset positions, and/or display a camera on a SPOT monitor.
Highlight the box under the Record heading and press
You can associate as many cameras with that camera as you wish. If the DVR detects
motion on the selected camera, it starts recording video from all the associated
cameras.
Rev 1.00
Figure 3-64 Daytime Setup Screen
Figure 3-65 Motion Detection Actions 1 Screen
Note You can associate multiple cameras with a camera that detects
motion.
Note For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
. Use the Up and Down arrow buttons
66
. A list of cameras appears.
Document 900.0856
12/06