Schedule Screen; Figure 3-50 Schedule Setup Screen - Honeywell HRXD9 User Manual

Configuration
You can save your Record settings by highlighting Save and pressing
Cancel exits the screen without saving the changes.

Schedule Screen

Highlight Schedule in the Record menu and press
appears.
You can program the DVR to record only during certain times based on time, day of the
week, and holidays. The smallest time segment you can use is 15 minutes.
Highlighting Schedule On and pressing
Schedule On mode, the DVR records video based on the schedule established in the
Schedule screen. When turning Schedule recording Off, you will be asked to confirm
your decision, and
recording will function even when Schedule is turned off.
recording.
Highlight the + and press
Highlight the box under the Day heading and press
scheduled recording will take place. Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat,
M~F, Hol and All.
Highlight the box under the Range heading and press
that the scheduled recording will take place. The smallest time segment you can use is
15 minutes.
Highlight the box under the Mode heading and press
mode that will be used. Choose from: No Record, Time, Event and Time & Event.
When the DVR is in the No Record mode, it will not record during the preset day and
time range as long as the PANIC button is not pressed. Use the No Record mode when
you do NOT want the DVR to record during certain times.
Rev 1.00
Figure 3-50 Schedule Setup Screen
displays at the top-left corner of each camera screen. Panic
to add a schedule item.
, and the Schedule setup screen
toggles between On and Off. In the
56
. Selecting
displays during panic
to change the days that the
to change the time range
to change the recording
Document 900.0856
12/06