Configuring Video Loss Settings - Honeywell HRHM1041 User Manual

88 | Performance Series HQA Digital Video Recorder User Guide
3.
4.
5.

Configuring Video Loss Settings

To configure video loss settings
1.
2.
3.
4.
5.
6.
7.
www.honeywell.com/security
Click Apply to save your settings.
To test your settings, click Test.
To copy the motion detection settings to additional channels, click Copy, select the
channels that you want to copy the settings to, and then click OK.
Go to Main Menu > Setting > Event > Detect > Video Loss.
On the Video Loss tab, in the Channel box, select the channel (camera) that you want to
configure video loss detection settings for.
Select the Enable check box to enable video loss detection for the selected channel.
To set the periods when video loss detection is active, next to Period, click Set, and then
follow the steps listed in To set up motion detection periods
To set the actions that you want the system to initiate when a video loss event occurs,
follow the steps listed in To set up motion detection event actions
Click Apply to save your settings.
To copy the settings to additional channels, click Copy, select the channels that you want
to copy the settings to, and then click OK.
on page 85.
on page 87.