Configuring Video Loss Detection Settings - Honeywell HRGX45 User Manual

94 | HRGX DVR User Manual

Configuring Video Loss Detection Settings

You can set up the DVR to trigger one or more of the following alarm responses when a video
loss event is detected:
Full Screen Monitoring
Audio Alarms
Surveillance Center
Notification
Email Notification
Alarm Output
To configure video loss settings:
1.
2.
3.
4.
www.honeywell.com/security
The monitor displays full screen video from the triggered channel.
When multiple channels are triggered simultaneously, the images
switch at regular intervals (the default dwell time is 10 seconds).
An audible beep sounds.
A signal is sent to a remote alarm host.
See
An email containing the event details is sent to one or more
recipients. See
A signal is sent to an external alarm.
See
Go to Menu > Camera > Video Loss.
Select the camera you want to configure video tampering detection settings for by clicking
a number in the Camera drop-down list.
Select the Enable Video Loss Alarm check box.
Click the Handling button
opens.
Configuring Remote Alarm Host Settings, page
Configuring Email Settings, page
Configuring Alarm Outputs, page
to set up the alarm response actions. The Handling window
99.
97.
87.