Storage Screen; Figure 3-14 Storage Information Screen - Honeywell HRXD9 User Manual

Configuration
Highlight the box beside Time Server and press
highlighting them and using the Up and Down arrow buttons to increase or decrease
the number value.
Highlight the box beside Interval and press
synchronization from 30 minutes to 1 day at various time intervals.
Last Sync-Time displays the last time the DVR was synchronized with the time server.
Highlight Run as Server and press
When it is On, the DVR you are setting up will run as a time server.
You can save your changes by highlighting Save and pressing
exits the screen without saving the changes.

Storage Screen

Highlight Storage in the System menu and press
appears and displays information about the DVR's storage devices.
The information in the Type column describes the storage device.
The capacity of the storage device is displayed in the Capacity column.
The Format column displays whether the device is used for recording (Record) or
archiving (Archive). Not Using indicates the device is not used for either recording or
archiving. Not formatted indicates the device is not formatted.
device has temporary space set aside so that video clips can be saved on a CD-RW or
DVD RW.
Highlight the box in the Format column for the desired storage device and press
You will be able to format the device for recording or archiving. When selecting Not
Using from Use As and highlighting Format, the device will not be used for either
recording or archiving. You can also set aside space to store temporary files for CD or
DVD burning by selecting Partition – CD/DVD Burn.
Rev 1.00
Figure 3-14 Storage Information Screen
. Change the numbers by
. Set the time interval for
. Pressing
. The Storage setup screen
29
toggles between On and Off.
. Selecting Cancel
indicates when the
Document 900.0856
.
12/06