Table of Contents
Advertisement
Configuration
Highlight the box under Record and press
associate as many cameras with the Text Input as you wish. If the DVR detects text
input, it starts recording video from all the associated cameras.
Highlight the box under the Alarm-Out and press
You can associate as many Alarm-Outs with the Text Input as you wish. When the DVR
detects text input, it triggers output signals on all the associated Alarm-Out connectors.
You can also have the DVR's internal buzzer sound if text input is detected.
Highlight the box under the Notify and press
Off by highlighting Notification and pressing
On and Off by highlighting that item and pressing
accept your changes.
Rev 1.00
Note
For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
Note
For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
Note
For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Figure 3-73
Text-In Actions 2 Screen
. A list of cameras appears. You can
. A list of Alarm Outputs appears.
. You can toggle the entire list On and
. You can toggle the individual items
. Highlight OK and press
73
to
Document 900.0856
12/06
Advertisement
Table of Contents
