Table of Contents
Advertisement
Operation
The Event Log Search screen can also be accessed by pressing ALARM unless there
is an alarm. There is no determined user authority to display the Event Log Search
screen, however, the event video will not be played unless a user with Search authority
logs into the system.
Pressing
Pressing PLAY/PAUSE will start playing the event video segment. Pressing SEARCH
returns to live monitoring.
You can also narrow your event search by selecting Option... and setting up the new
search condition.
You can search video from the first to last recorded images, or you can set the start and
stop times and dates.
Highlight the box beside From and press
to Off, you can enter a specific Date and Time. When set to On, the search will be from
the first recorded image.
Highlight the box beside To and press
Off, you can enter a specific Date and Time. When set to On, the search will be from the
last recorded image.
Highlight the box beside Check Time Overlap and press
and Off. You will only be able to turn the Check Time Overlap on or off if a user-defined
date and time is set to From and To. If the DVR's date and time have been reset, it is
possible for the DVR to have more than one overlapping start and stop time. When set
to On, you will be asked to select one of the overlapping start and stop time. When set
to Off, the DVR will display search results from all start times to all stop times.
Rev 1.00
will extract the event video and display the first image of the event.
Note
It is possible that no recorded image displays on the current
screen. Press DISPLAY and change the screen mode to 4x4.
You will be able to easily see the camera have recorded video
during target time.
Figure 4-15
Event Log Search Option Screen
to toggle between On and Off. When set
to toggle between On and Off. When set to
96
. It toggles between On
Document 900.0856
12/06
Advertisement
Table of Contents
