Figure 3-75 Check Recording Screen; Figure 3-76 Storage Screen - Honeywell HRXD9 User Manual

Configuration
Highlighting the box under the Interval heading beside each alarm-in and pressing
allows you to change the interval that you want the DVR to run self-diagnostics on Alarm
Inputs. You can select from 1 hr to 30 days or Never.
Highlight the Storage tab and the Storage screen displays.
Highlight the box beside Disk Bad Notify, and press
bad disk sectors at which you want the DVR to trigger an alert. Percentage levels range
from 10% to 90%.
Highlight the box beside Disk Almost Full Notify, and press
level of disk usage at which you want the DVR to trigger an alert. Percentage levels
range from 80% to 99%.
Highlight the Setup... box beside Disk S.M.A.R.T., and press
Setup screen appears.
Rev 1.00
Figure 3-75 Check Recording Screen
Figure 3-76 Storage Screen
75
. Select percentage level of
. Select the percentage
. The S.M.A.R.T.
Document 900.0856
12/06