Figure 3-77 S.m.a.r.t. Setup Screen - Honeywell HRXD9 User Manual

Configuration
Highlight Enable, and press
Highlight the box beside Check Time, and press
Weekly and Daily. If you select Monthly, you will be asked to set the Day of the Month
and Time. If you select Weekly, you will be asked to set the Day of the Week and Time.
If you select Daily, you will be asked to set the Time.
Highlight the first box beside Temperature Threshold, and press
Down arrow buttons to scroll through the numbers. Refer to the hard disk drive
manufacturer's documentation for the correct temperature setting. If the temperature of
hard disk drive exceeds the defined threshold, the system triggers an alert.
Highlight the second box beside Temperature Threshold, and press
°C (Celsius) or °F (Fahrenheit), and press
The box beside Last Check-Time displays the Date and Time of the last S.M.A.R.T.
check.
Highlight OK, and press
without saving the changes.
Highlight the Actions tab and the System Event Actions screen displays.
Rev 1.00
Figure 3-77 S.M.A.R.T. Setup Screen
Note If Enable is turned Off, you will not be able to make changes to
any of the boxes.
to accept the changes. Selecting Cancel exits the screen
to toggle between On and Off.
. You can select from Monthly,
.
76
. Use the Up and
. Select either
Document 900.0856
12/06