Configuration
DVRNS Setup
Highlight the DVRNS tab, and the DVRNS screen displays.
Highlight Use DVR Name Service and press
Highlight the box beside DVRNS Server and press
allowing you to enter the IP address or domain name of the DVRNS server.
Rev 1.00
Figure 3-30
DVRNS Setup Screen
Note
When LAN settings have been changed, set up the DVRNS after
saving your LAN changes by highlighting Save and pressing
.
Note
The DVRNS (DVR Name Service) allows the DVR to use Dynamic
IP addresses for remote connection. When this feature is On,
you can access your DVR remotely using the DVR name instead
of its IP address. For the DVRNS feature, the DVR should be
registered on the DVRNS server.
Note
You will need to get the IP Address or domain name of the
DVRNS Server from your network administrator.
to toggle between On and Off.
41
. A virtual keyboard appears
Document 900.0856
12/06