Table of Contents
Advertisement
Configuration
Video Loss Screen
Highlight Video Loss in the Event menu and press
appears.
The DVR checks to see if anything is obscuring the camera. Highlight the slider bar
beside Check Obscuration, and use the Left and Right arrow buttons to adjust the
setting. The sensitivity can be set from Never to 255 (extremely sensitive).
Highlight the Actions 1 and Actions 2 tabs and the Video Loss Actions 1 and Actions
2 screens display.
The DVR can be set to react to video loss differently for each camera. Each camera can
be associated with another camera, trigger an Alarm-Out connector, sound the DVR's
internal buzzer, notify a number of different devices, move PTZ cameras to preset
positions, and/or display a camera on a SPOT monitor.
Highlight the box under the Record heading and press
You can associate as many cameras with that camera as you wish. If the DVR detects
video loss on the selected camera, it starts recording video from all the associated
cameras.
Rev 1.00
Figure 3-67
Video Loss Settings Screen
Figure 3-68
Video Loss Actions 1 Screen
68
. The Video Loss setup screen
. A list of cameras appears.
Document 900.0856
12/06
Advertisement
Table of Contents
