Table of Contents
Advertisement
Troubleshooting
Troubleshooting
Problem
No Power
No Live Video
Live Video very bright
DVR has stopped recording
The
icon displays,
however, the DVR is not
recording
Rev 1.00
Table E-1
Troubleshooting
Possible Solution
•
Check power cord connections.
•
Confirm that there is power at the outlet.
•
Check camera video cable and connections.
•
Check monitor video cable and connections.
•
Confirm that the camera has power.
•
Check camera lens settings.
If a cable is attached to the Loop connector, make certain it is
connected to a properly terminated device.
If the hard disk drive is full, you will either need to delete video or set
the DVR to Overwrite Mode.
When the DVR is in the Pre-Event recording mode, the yellow
display when there is no event, and the DVR is not recording. The
red
and
display when any event occurs and the DVR starts
recording.
119
E
and
Document 900.0856
12/06
Advertisement
Table of Contents
