Figure 4-19 Motion Search Option Screen - Honeywell HRXD9 User Manual

Operation
Highlighting Close and pressing
event and display the first image of the event. Pressing PLAY/PAUSE will start playing
the event video segment. Pressing SEARCH returns to live monitoring.
You can also narrow your event search by selecting Option... and setting up the new
search condition.
You can search video from the first to last recorded images, or you can set the start and
stop times and dates.
Highlight the box beside From and press
to Off, you can enter a specific Date and Time. When set to On, the search will be from
the first recorded image.
Highlight the box beside To and press
Off, you can enter a specific Date and Time. When set to On, the search will be from the
last recorded image.
Highlight the box beside Type and press
and Museum Search. Motion Search detects motion in the defined area. Museum
Search detects if a defined object has moved.
Highlight the box beside Zone and press
grid overlaid. You can turn sensor blocks On and Off to define the area of the picture in
which you want to search for motion.
Rev 1.00
Figure 4-19 Motion Search Option Screen
Note Defining the area of the image in which you want to search for
motion is nearly identical to setting up the DVR for Motion
Detection. Please refer to Motion Detection Screen in
Configuration
detection blocks.
will extract the video associated with the Motion
to toggle between On and Off. When set
to toggle between On and Off. When set to
. You can select between Motion Search
. An image from the video appears with a
for more detailed instructions on setting up the
100
Chapter 3,
Document 900.0856
12/06