Covert Camera; Spot Monitoring - Honeywell HRXD9 User Manual

Operation
cameras on a 2x2 screen. If five to nine cameras are associated with the event, the DVR
will display the cameras on a 3x3 screen. If 10 or more cameras are associated with the
event, the DVR will display the cameras on a 4x4 screen.
Event monitoring lasts for the dwell time set for event recording. After the dwell time has
elapsed, the monitor returns to the previous screen unless another event has occurred.
If you want to return to the live monitoring mode before the dwell time has elapsed,
press DISPLAY or one of the camera buttons.

Covert Camera

If a camera is set up as Covert 1 in the Camera setup screen (Settings tab), that camera
will not be displayed unless a user with Covert Camera View authority logs into the
system. However the camera title and status icons will be displayed on the monitor.
If a camera is set up as Covert 2 in the Camera setup screen (Settings tab), that camera
appears to be Off unless a user with Covert Camera View authority logs into the
system. The camera title will be grayed out and status icons will not be displayed on the
monitor.
If a user who has Covert Camera View authority logs in, the user can view video from
cameras set to Covert 1 or Covert 2 including the camera titles and status icons.

Spot Monitoring

You can select the camera you want to display on a Spot Monitor. Press SPOT on the
front panel or remote control, and select one of four Spot Monitors. Then, select the
camera to be displayed on the Spot Monitor.
Rev 1.00
Note When a camera is set up as Covert 1, the DVR displays the
camera title and status icons on the covert video. When set up as
Covert 2, the DVR displays only the camera title on the video.
85 Document 900.0856
12/06