MS SERVICE The fax machine allows you to send and receive messages 5. Press the key: (SMS), even if you are connected to a switchboard, and The display shows: to save up to 40 messages, of which: 5 written and sent messages, 5 written and not yet sent messages and 30 re- ceived messages.
Page 4
4. To confirm the setting, press the key: O SEND MESSAGES The display shows: Apart from sending messages (SMS) (max. 160 characters each), the fax machine allows you to: ensure the correct operation of SMS service if the recipi- ents have more than a telephone set connected to the 5.
Page 5
12. To confirm the setting, press the key: O SAVE A MESSAGE WITHOUT The fax machine starts transmitting and the message SENDING IT "TRANSMITTING" appears on display. If the transmission has been completed successfully, at 1. Press the key: the end the message "TX COMPLETED" appears on The display shows: display for a few seconds.
3. To confirm the setting, press the key: O RECEIVE MESSAGES The display shows from left to right: the reference number The fax machine can receive up to 30 messages (SMS). When which identifies the messages present on the list of mes- a message (SMS) is received, the "...
7. To confirm the setting, press the key: O ANSWER A MESSAGE RECEIVED The display shows on the upper line: 1. Press the key: The display shows: From this point on, follow the procedure described in "To write and send a message (SMS)", as from the step in which the display shows: "SMS TEXT".
Page 8
5. To confirm the setting, press the key: 7. To confirm the setting, press the key: The display shows: 8. To return the fax machine to its initial stand-by mode, press the key: 6. Press a key from 1 to 9 to identify a terminal different from "0"...
Page 9
6. To select the message, press the key: ROM THE LIST OF MESSAGES RECEIVED 1. Press the key: The display shows: The display shows: You can also choose one of the following options: "SEND", "EDIT" or "PRINT". 2. Press the keys DELETE: to delete the message selected.
Page 10
3. To confirm the setting, press the key: 3. To confirm the setting, press the key: The display shows: The display shows: 4. To confirm the setting, press the key: 4. Press the keys until the display shows: The display shows from left to right: the reference number which identifies the messages present on the list of mes- sages that you have selected, the correspondent's tel- 5.
Need help?
Do you have a question about the Fax-Lab 610 and is the answer not in the manual?
Questions and answers