Manual Registration - Gigaset SX100 isdn Instructions Manual

2. On the handset (within 30 seconds)
v
s
Settings
s
Register H/Set
s
Base 1
~
OK
s
Int.11
The handset returns to idle status after registration is complete. The internal number of
the handset appears in the display.
The handset cancels the base search after 60 seconds. If registration has
i
not completed within this time period, repeat the process.

Manual registration:

Gigaset handsets starting with Gigaset 1000 and other GAP-capable
handsets
The following describes how to register handsets of the Gigaset families, the handsets
A 2, C 1, C 2 or handsets of other GAP-capable devices.
GAP Generic Access Profile = European standard for the interaction of handsets and
bases of other manufacturers.
If the internal numbers Int.11 to Int.16 on your telephone have already been assigned,
please de-register another handset which is no longer needed before registering
(page 136).
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
÷
The handset is automatically assigned the lowest unassigned internal number from the
number range Int.11 to Int.16.
Registering/de-registering further handsets
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e.g. Base 1.
OK
Enter the system PIN of the base (Factory default:
0000) and confirm. In the display are
Regstr.Procedure and the name of the base (e.g.,
Base 1).
If the handset has found the base, the list of available
internal numbers is shown in the display.
Select and confirm the internal number, e.g., Int.11 .
OK
Press the Registration/Paging key on the base for
approximately 3 seconds. Registration is initiated.
135