Changing The Name Of The Base; Adjusting The Loudspeaker Volume - Gigaset SX100 isdn Instructions Manual

Handset settings

Changing the name of the base

The names " e 1? to "Base 4" are assigned automatically. You can change the name of
Bas
your base.
The name of the base is handset-specific, i.e. the base receives the name
i
which was assigned by the handset. The same base can have different
name on different handsets.
v
s
Settings
s
Select Base
s
R[RRRRRRRRRRRRRRRRRRR]
Edit
~
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Save

Adjusting the loudspeaker volume

You can adjust the handsfree volume on five levels and the earpiece volume on three
levels – you can even do this while an external call is in progress.
v
s
Audio Settings
Handset Volume
r
s r
[RRRRRRRRRRRRRRRRRRRRRRRRRRR]
Save
a
Ringer echo
In certain situations, the sound quality could be less than what you are used to. You can
enhance the sound quality of the long ringer melodies (4-10).
v
s
Audio Settings
Ringer Echo
a
138
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the base and press the display key.
Enter a new name (up to 16-characters)
(for inputting text see page 153).
Press the display key to save the setting.
Open the menu.
Select the menu item and confirm.
OK
Confirm. You hear the current volume setting for
OK
handsfree talking.
Set the volume for handsfree talking (1-5) in the
input field.
Scroll one line lower and set the earpiece volume (1–
3).
Press the display key to save the setting.
Hold down (return to idle status).
Open the menu.
Select the menu item and confirm.
OK
Confirm (‰ = activated).
OK
Hold down (return to idle status).