Activating/Deactivating Call Waiting - Cw - Gigaset SX100 isdn Instructions Manual

Setting the system
Picking up a call during ring delay see page 23.
v
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
v
s
Ring delay
s
~
OK
Activating/deactivating call waiting – CW
This function can be set up individually for each party. When call waiting is set, the caller
hears the phone ringing while you are talking on the telephone. The call is signalled
acoustically as well as is shown in the display on your handset.
When call waiting is deactivated, the caller hears the phone ringing while you are
talking on the telephone and other devices are assigned to this MSN.
When call waiting is deactivated, the caller hears the busy signal while you are talking
on the telephone and you are the only party assigned to this MSN.
By factory default, the function is activated. For call waiting with an external call see
page 32.
v
s
Base Settings
s
Settings
~
OK
s
Setup user
s
Setup device
s
Int.11
v
s
Call waiting
128
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the internal number, e.g., Int.11 .
Open the submenu.
Select the menu item and confirm.
OK
Select incoming MSN, e.g., MSN11: Anna, and
OK
confirm.
No. of rings should be entered, e.g., 2, and confirm.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the internal number, e.g., Int.11 .
Open the submenu.
Select the menu item and confirm (
OK
‰
= activated).