Defining The Outgoing Msn For The Next Call; Ringback When Busy (Ccbs) / When The Call Is Not Answered (Ccnr) - Gigaset SX100 isdn Instructions Manual

Defining the outgoing MSN for the next call

Even if you have defined an individual outgoing MSN for the handset (page 119), you
can select another MSN as outgoing MSN before each call, e.g., for individual recording
of charges.
Make sure that the outgoing/incoming MSN corresponds to the phone number
registered at your SMS centre (page 56).
By factory default, MSN next call is not activated for an MSN.
v
s
Base Settings
s
Call preparat.
s
MSN next call
s
MSN
a
The temporary outgoing MSN is transferred to the person called as phone
i
number information.
You can set up your handset so that after pressing the Talk key c or the handsfree key
d a list of all available outgoing MSNs is displayed (page 119).

Ringback when busy (CCBS) / when the call is not answered (CCNR)

Prerequisite: The telephone exchange supports this performance feature.
Ringback when busy – CCBS (Completion of calls to busy subscriber)
The party you have called is now making a call. Automatic ringback saves you repeated
attempts to reach this party.
Ringback when the call is not answered – CCNR (Completion of calls no reply)
If the party you called does not answer the call, you can set up an automatic ringback.
As soon as the required party has set up a connection and is free again, you will get the
ringback. The ringback request is automatically cancelled after approximately 2 hours
(depending on the telephone exchange).
Activating ringback
The party you have called is busy or does not answer.
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
CALLBCK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the required MSN and confirm
OK
‰
( = is activated).
The next call uses this MSN.
Hold down (return to idle status).
Press the display key.
Wait for confirmation by the telephone exchange.
Making calls
25