Setting The Walk And Talk Mode - Gigaset SX100 isdn Instructions Manual

Using several handsets
Deactivating the room monitor
Press the display key on the room monitor handset to deactivate the room monitor
OFF
function.
To reactivate the room monitor function with the same phone number,
i
you must turn on the activation again and save with

Setting the Walk and Talk mode

The Walk and Talk function allows two handsets to communicate with each other no
matter how far they are from the base.
Example: You go on holiday and take two handsets with Walk and Talk functionality
with you. Set the Walk and Talk function on both handsets. You can now communicate
using the handsets.
Prerequisite:
Both handsets have been registered to the same base or
◆
Both handsets are registered to different bases and both are set to Best Base
◆
(page 136) or
One of the handsets is not registered to any base and the registered handset is set
◆
to Best Base or
Neither handset is registered to a base.
◆
In Walk and Talk mode
The maximum range between handsets is 300 metres outdoors,
◆
i
The handsets cannot be reached by incoming calls,
◆
Handset operating times are severely curtailed.
◆
102
.
Save