Preparing to use your phone
Idle status
Display in idle status (example, Logo deactivated)
Gigaset SX100isdn
Ð
Internal 11
20.09.03
09:45
•
§§§§§§§§ SMS§§§§§
Returning to idle status from anywhere in the menu:
Hold down the End call key a for about 1 second or
◆
do not press any key: After about 2 minutes the display automatically returns to idle
◆
status.
Changes you have not confirmed or saved by pressing
will be discarded.
OK
Example of menu operation: "Setting Handsfree Volume"
v
1.
s
2.
v
3.
OK
or
v
4.
or
OK
r
5.
6.
[RRRRRRRRRRRRRRRRRRRRRRRRRR ]
Save
a
7.
Operating the base – Getting started wizard
A few settings are necessary before using your telephone. The Getting started wizard is
designed to help you with this. It can be opened anytime using your handset. The
following settings can be set one after the other.
Date and time
◆
Show/hide answering machine 1...3 (on SX 150isdn)
◆
Find out/enter the MSN of your connection
◆
Set the device type for the connected device
◆
Set the incoming MSN
◆
Set the outgoing MSN
◆
Outside line code (when using a PABX)
◆
14
Answering machine activated
V
Two lines with context dependent
system information
(Date and time have already been set)
Press right side of the control key. This opens the menu.
Keep pressing the lower part of the control key until you see Audio
Settings marked in the display (by the frame).
Use the right side of the control key or the display key
confirm.
Confirm the first display entry, Handset Volume
side of the control key or with the display key
Press the left or right side of the control key to select the required
volume (1–5).
Press the display key to save the setting.
Press and hold the End call key to return to the idle status.
Gigaset SX150isdn
Ð
×
AM:
Internal 11
20.09.03
09:45
•
SMS
,
,
,
or with Save
OK
Yes
Save
Send
OK
using the right
,
.
OK
V
to