Specifying The Number Of Rings Before The Answering Machine Starts; Deactivate/Activate Spoken Date And Time; Specifying The Recording Time And Recording Quality - Gigaset SX100 isdn Instructions Manual

Specifying the number of rings before the answering machine
starts
You can set when you want the answering machine to activate (after how many rings).
The options are: 1 ring tone, 2 ring tone,..., 9 ring tone. Instead of a set number of
rings, you can also set the charge saving setting Automatic 2/4 (factory default). In this
setting the answering machine activates automatically:
after 2 rings if there are new messages;
◆
after 4 rings if there are no new messages.
◆
When operating remotely (page 85) by the third ring you will know that there are no
new messages (otherwise the answering machine would have already activated). There
will be no call charges if you hang up now.
Prerequisite: You have selected an answering machine (page 76).
s
Settings
s
No. of rings
s
Automatic 2/4

Deactivate/activate spoken date and time

When playing back each message/memo, you can have the recording data and -time
(time stamp) spoken by the answering machine (activated by factory default).
Prerequisite: You have selected an answering machine (page 76).
s
Settings
Message/Memo
s
Time stamp

Specifying the recording time and recording quality

You can set the maximum length of a message and its recording quality. The recording
quality determines the total recording time of your answering machine.
The setting High quality allows a total recording time of up to 12 min., and Long
recording (standard quality, in general this is sufficient) allows up to 25 min. The Long
recording recording quality and the Maximum recording time are set by factory
default.
Recording a call ends:
if there is a pause of more than 8 seconds
◆
i
at the end of the call; the caller interrupts the connection.
◆
after the maximum set recording time has passed, if the setting
◆
Maximum was used, when the memory is full.
Setting the answering machine (on SX150isdn)
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select the number of rings or Automatic 2/4 and
OK
‰
confirm ( = set).
Select the menu item and confirm.
OK
Confirm.
OK
Select the menu item and confirm (
OK
‰
= activated).
91