Setting up rejecting for the entire MSN group
You can reject an external call not only on your handset, but for all members of an MSN
group. Pressing
REJECT
entire group will no longer be called. Someone using call waiting can also be rejected
during a call. The call is added to the calls list.
By factory default, the function is not activated.
v
s
Base Settings
s
Settings
~
OK
s
ISDN settings
s
Reject all
Forwarding calls
Forwarding internal calls
Only one forward destination can be selected for internal call
◆
forwarding.
Only one single-stage call forwarding is supported: If you are
◆
i
forwarding to a party who has activated internal call forwarding
himself, this will no longer work. The forwarded call will ring at the
party you forwarded it to.
By factory default, internal call forwarding is deactivated.
Setting up the forward destination
v
s
Base Settings
s
Forward. base
~
OK
s
Forward. dest.
s
Int.11
will give the caller a busy signal instead of a ringing tone. The
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the menu item and confirm (
OK
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Enter system PIN, if needed (page 113).
Select the menu item and confirm.
OK
Select the internal number, e.g., Int.11
‰
(
= is activated).
Setting the system
‰
= activated).
121