Preparing to use your phone
Connecting the base
Underside of
base (enlarged
view)
1.
Plug in the small plug on the ISDN cable into the socket (it clips into place),
◆
Place cable in the cable duct,
◆
Insert second plug of the ISDN cable into the NTBA (ISDN connection)
◆
.
Underside of
base (enlarged
view)
2.
Insert the small jack on the power cord into the socket on the underside of the
◆
base,
Place cable in the cable duct,
◆
Keep the mains unit plugged in at all times to ensure your phone is
◆
ready for use whenever you need it.
i
The base and the registered handset are not operational if there is
power failure. However, all settings and stored items (messages,
directory entries, etc.) are retained indefinitely.
8
Cable duct
Cable duct
ISDN connection
(NTBA)
1.
Telephone plug
with ISDN cable
Socket
2.
Mains unit with
mains cable