Manual Registration - Gigaset CX150 isdn Instructions Manual

2. On the handset (within 30 sec.)
MENU
s
Handset Settings
s
Register Handset
s
Base 1
~
OK
s
Int.11
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
The handset interrupts the base search after 60 seconds. If registration
i
has not been completed within this time, repeat the procedure.

Manual registration:

Gigaset handsets from Gigaset 1000 onwards and other handsets with
GAP functionality
Below is an explanation of how to register handsets in the Gigaset range, A2, C1 and C2
handsets or handsets for other devices with GAP functionality.
GAP Generic Access Profile = European standard for the interaction of handsets and
base stations made by different manufacturers.
If internal numbers Int.11 to Int.16 on your phone have already been assigned, please
de-register another handset you no longer require before registering a new one
(page 90).
1. On the handset
Start to register the handset as described in its operating instructions.
2. On the base
÷
The next unassigned internal number between Int.11 and Int.16 is automatically
assigned to the handset as it is registered.
Registering/de-registering other handsets
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
Select base (1–4) and confirm, e.g. Base 1.
OK
Enter the system PIN for the base (the factory setting
is 0000) and confirm. Registering appears in the
display along with the name of the base e.g. Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
Select internal number and confirm, e.g. Int.11.
OK
Press the registration/paging key on the base for
about 3 seconds. This starts the registration.
89