Activating/Deactivating Advisory Tones - Gigaset SX100 isdn Instructions Manual

To deactivate the ringer in the idle status, press the key and hold until the P key until
Ú
the icon appears. The ringer cannot be re-activated while an external call is in
progress.
Deactivating the ringer for the current call:
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
Silence
Activating/deactivating the alert tone
When you activate and deactivate the ringer you can activate an alert tone. When you
get a call, you will hear a short tone (beep) instead of the ring tone.
P
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
Beep on
P

Activating/deactivating advisory tones

Your handset uses 'advisory tones' to tell you about different activities and statuses. The
following advisory tones can be activated and deactivated individually (the default
setting is on).
Key click: Every press of the key is confirmed.
◆
Acknowledge tones:
◆
– Confirmation tone (rising tone sequence): at the end of an input/setting, when
the handset is placed in the base and when a text message or a new entry arrives
in the calls list or answering machine list (on SX150isdn)
– Error tone (a falling tone sequence): with incorrect inputs
– End of menu tone: when scrolling at the end of a menu
Battery tone: The batteries must be charged.
◆
v
s
Audio Settings
s
Advisory Tones
r
s r
s r
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
Save
a
Press the display key.
Press and hold the star key and within 3 seconds:
Press the display key. A call is now signalled by one
brief alert tone. You will now see º in the display.
Deactivating the alert tone:
Press the star key and hold. The ringer is activated
again.
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
In the Key Tones: line, activate or deactivate the key
click.
Scroll to the Confirm.: line to activate or deactivate
the confirmation tones.
Scroll to the Battery: line and choose On, Off, or
in Verb.. The battery warning tone is activated or
deactivated or only rings during a call.
Press the display key to save the setting.
Hold down (return to idle status).
Handset settings
141