Text Messages To A Pabx; Errors When Sending And Receiving A Text Message - Gigaset SX100 isdn Instructions Manual

to a PABX
Text messages
You can only receive a text message when the Calling Line Identification is
forwarded to the extension of the PABX (CLIP).
The CLIP of the SMS centre phone number is evaluated in your telephone.
If your phone is connected to a PABX, you may have to prefix the number of the SMS
centre with an access code (this depends on your PABX). The access code can be stored
in your base (page 144).
If in doubt, you can test your PABX by sending a text message to your own phone
number and putting the access code before the number of the SMS centre. If you do not
receive the message, send another one, this time without the access code.
When you send messages, your sender number may be sent without your extension
number. The recipient cannot reply to you directly in this case.

Errors when sending and receiving a text message

Errors when sending a text message
Text messages that cannot be sent are assigned an error status e.g., "Error FD" and are
saved in the incoming message list.
The following error codes are displayed:
Error Code Description
E0 The Calling Line Identification is deactivated permanently (page 22).
FE Error occurred during message transfer.
FD Connection to SMS centre failed.
Text messages cannot be sent or received if the phone number of an
SMS centre is missing or incorrectly stored. Check that the phone
number of the SMS centre has been correctly stored.
C3 Faulty recipient phone number
You can view information about sources of error on the display.
Prerequisite: You have opened the incoming message list (page 66).
s
s
Error status
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
Errors when receiving a text message
A message appears on the display if your phone cannot receive any more text messages.
You cannot receive text messages under the following conditions:
call forwarding is activated with All Calls,
◆
the memory (incoming and outgoing message list) is full.
◆
To scroll text messages that could not be sent.
Select the menu item and confirm. The source of
OK
error appears in the display.
Press the display key to return to the incoming
message list.
SMS (text messages)
73