Remote Operation - Gigaset SX100 isdn Instructions Manual

Checking the settings
You can check the following settings instead of messages/memos:
Announcement (type of announcement)
◆
Recording (length/quality)
◆
Time control (on/off, start time of the announcements)
◆
Start options (number of rings)
◆
Playback (type, automatic pause: on/off)
◆
Remote options (remote operation: on/of, remote deletion: on/off)
◆
General (language, remaining memory time)
◆

Remote operation

The remote control can be used to operate your answering machine from a registered
handset or from any external connection or mobile phone, e.g., listen to and delete
messages. The procedures for both types of remote operation are the same except for
the initial start.
Prerequisite:
Remote operation from an external connection can only be used if you have defined
◆
an AB PIN (page 93). The AB PIN must always be given when operating remotely.
In order to be able to fully use an answering machine externally (changing settings,
◆
deleting messages), you must enable the remote operation and remote deletion
(see below).
Instruction for remote operation
If a function requires two keys, they must be pressed within 4 seconds. Otherwise, the
entry is cancelled or only the function of the second key is carried out. If you press the
wrong key, you can cancel it with E
Spoken instructions are available for a few functions, activated by pressing the following
keys.
0 ;
: ;
F ;
9 ;
Using the answering machine (on SX150isdn)
Help with deleting
Help with new messages/phrases
Help with recording
Help with operating modes
85