Security settings
Changing the System PIN
The system PIN (Personal Identification Number) is used to protect the following
settings from unauthorised access:
Call charge settings (v / Call Charges)
◆
Internal and external call forwarding
◆
(v Base Settings / Ext. call forw. or Int. call forw.)
SMS service centres, party configurations, security, ISDN, and system settings (v /
◆
Base Settings
/
Getting started wizard (v / Base Settings
◆
The system PIN is only effective when it is not 0000.
The system PIN is pre-set to 0000 at the factory.
v
s
Base Settings
s
Settings
~
OK
Security
s
Change PIN
~
OK
~
OK
a
Do not forget the new system PIN! If you forget it, the device will require
!
technical intervention. In this case, contact the Siemens Hotline.
Settings)
Open the menu.
Select the menu item and confirm.
OK
Select the menu item and confirm.
OK
If the current PIN is not 0000: Enter PIN and confirm.
Confirm.
OK
Select the menu item and confirm.
OK
Enter new system PIN (max. 8 digits, 0 to 9) and
confirm.
Repeat the new system PIN and confirm.
Return to idle status.
Installation)
/
Security settings
113