Sending An Sms And Outgoing Message List - Gigaset SX100 isdn Instructions Manual

SMS (text messages)

Sending an SMS and outgoing message list

Information about writing and sending an SMS
If you are interrupted when writing an SMS (by a call, an incoming SMS, or the handset
changes to idle status because the waiting time was exceeded), the SMS is saved
automatically in the outgoing message list. You can continue to write the SMS later
(page 62).
Text messages that cannot be sent are assigned an error status (page 73) and are placed
in the incoming message list.
Text messages are only stored automatically if sending is interrupted. If you wish to
store a message then you must do so before it is sent.
Remember that some service providers will bill you for a cancelled call
i
to the SMS centre.
Writing text messages
A single text message can be up to 160 characters long. If your text is longer, it will be
sent automatically as a linked message. Up to four messages with 153 characters each
can be linked. This means that you can enter up to 612 characters. But remember that
linking is more expensive.
When you have opened the input field for the text message, press the display key ©.
From the menu, select Select Language and then press
Afterwards, select an input language and confirm this with
call key a quickly twice, to return to the input field. The setting of the input language
only applies to the current text message.
You write a text message like this:
v
SMS
Write message
~
60
Open the menu.
Confirm.
OK
Confirm. The input field opens.
OK
Input your text (for text input see page 153).
[
to confirm your choice.
[
and then press the end