Gigaset SX100 isdn Instructions Manual page 30

Establishing a connection to an internal party:
either ...
~
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
LIST
s
Int.11
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
BACK
either ...
t s
or ...
[RRRRRRRRRRRRRRRRRRRRRRRRRR]
CONF.
or ...
Toggling
Prerequisite: You have established an enquiry call (page 27 or page 28).
There is an active connection (the one established with the enquiry call) and one on
hold (the first). You can alternate talking with both persons.
Use t s to switch between the persons on the lines.
An external party hears the the set-up waiting melody in a connection on hold
(page 130) when the connection is on hold internally (page 129). An internal party in a
connection on hold does not hear a waiting melody.
Ending an enquiry call/toggling
either ...
v
s
End
or ...
a
Enter the number of the internal party you want.
Press the display key.
Select the required internal number,
OK
e.g., Int.11 , and confirm.
The connection to the internal party is established.
The internal party dialled is busy:
Press the display key to return to the external party.
The internal party has answered:
Toggling (page 29):
Switch between persons on the lines.
Conference switching (page 30):
Press the display key to establish conference
switching.
Transfer call (page 31).
End the currently active call:
Open the menu.
Select the menu item and confirm. You will return to
OK
the waiting party.
Hold down (return to idle status).
The active connection is ended. You will
automatically be called back by the person on hold.
Functions during a call
29